Peel off the adhesive tape on the back of the mounting bracket. Please be aware that the adhesive tape on the back of the mounting bracket is permanent, meaning that once you attach it to your screen, you won’t be able to remove it. Use other non-permanent double-sided tape for non-permanent mounting.

Measure and locate the middle of the bottom frame of the screen. You will use this as a reference when positioning the mounting bracket.

If you clean it using a wet wipe, make sure that the area is completely dry before proceeding with the next step.

Make sure that the area where the eye tracker is going to be mounted is free from dust and dirt.

If you already have a mounting bracket for the Tobii Pro X2–30 or X2–60 attached to your monitor you should use one of the Mounting bracket adapters provided.

For mounting the Tobii Pro X3-120 to a laptop or monitor you use one of the adhesive mounting brackets provided in the standard package. Try out the mounting bracket on the screen to see if the bracket works for your screen.

Always try out the Pro X3-120 before attaching it permanently to the screen in order to make sure that it works properly in conjunction to your screen and your computer.

Your computer is equipped with at least one Gigabit LAN port if you intend to use the External Processing Unit You are using a powered USB 3.0 port with the latest driver and with BC 1.2.

The firewall(s) that you might have on the computer allow access for the eye tracking software.

You are using Windows 7 (64-bit version) or later as an operating system.

The screen used for presenting the stimuli has a proper size and form factor to be used with the eye tracker that you have.

You have administrator rights for the computer that you are using in order to be able to install and run the installation and configuration software.

Your computer is compatible with the software that you are going to use (Tobii Pro Studio or other eye tracking software). Please see the Tobii System Requirements and Recommendations document.

Before starting to mount and install your eye tracker, you need to make sure that:

Samplitude pro x3 basics tutorials